Electronics guide: Diode, Capacitor, Arduino Platform, and Electronics Store
What is the difference between MOSFET and FET? The term FET (Field-Effect Transistor) is a broad category that includes various types of transistors where the conductivity between two terminals (source and drain) is controlled by an electric field applied to a third terminal (gate). MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) is a specific type of FET that … Read more
Biasing a photodiode involves applying a voltage to it in a way that optimizes its performance for detection of light signals. One common method is to bias the photodiode in reverse bias. Reverse biasing means applying a negative voltage to the photodiode’s p-n junction, where the p-type semiconductor is connected to the negative terminal of … Read more
0-ohm resistors, despite their nominal resistance value of zero ohms, still have power and tolerance ratings for practical reasons related to manufacturing, circuit design, and reliability. The power rating of a 0-ohm resistor specifies the maximum amount of power it can dissipate without overheating or damage. This rating is important because even though the resistor … Read more
A laser diode’s source of light is generated within the semiconductor material itself through a process called stimulated emission. Unlike traditional light sources that emit light due to thermal radiation or other means, laser diodes produce light using a phenomenon where electrons and holes recombine in the semiconductor material. This recombination process releases photons of … Read more
Photodiodes come in several types, each suited for different applications based on their structure and operating principles. One common classification is based on the material used in their construction, such as silicon (Si) photodiodes, which are widely used due to their cost-effectiveness and availability in various sizes and configurations. Silicon photodiodes are sensitive to visible … Read more
Photodiodes are heavily doped to enhance their sensitivity to light and improve their performance as light detectors. Doping refers to the intentional addition of impurities into a semiconductor material to alter its electrical properties. In the case of photodiodes, they are typically doped to increase the number of charge carriers (electrons and holes) within the … Read more
“Pinch voltage” generally refers to the voltage at which a phenomenon called “pinch-off” occurs in certain electronic devices, particularly in Field-Effect Transistors (FETs) such as JFETs (Junction Field-Effect Transistors). It is the voltage at which the channel between the source and drain terminals of the FET is completely constricted, leading to a significant reduction in … Read more
LED (Light Emitting Diode) lights have become highly efficient and versatile in various lighting applications, offering advantages such as energy efficiency, long lifespan, and durability. While current LED technology is already highly optimized, ongoing research and development are exploring new possibilities for lighting. One potential future alternative that researchers are exploring is OLED (Organic Light … Read more
If a positive VGS (voltage between the gate and source) is applied to a JFET (Junction Field-Effect Transistor), the transistor will operate in a manner dependent on its type. For an n-channel JFET, which is the most common type, a positive VGS (where the gate is more positive than the source) will create an electric … Read more
Capacitors and batteries serve different purposes due to their fundamental differences in energy storage and delivery mechanisms. While capacitors can store electrical charge, they cannot directly replace batteries in all applications. Capacitors are characterized by their ability to store and release electrical energy rapidly, but their energy storage capacity is typically much lower compared to … Read more